 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD- 95725 SMPS MOSFET Applications l High frequency DC-DC converters l Lead-Free IRF7451PBF HEXFET(R) Power MOSFET VDSS 150V RDS(on) max 0.09W ID 3.6A Benefits Low Gate to Drain Charge to Reduce Switching Losses l Fully Characterized Capacitance Including Effective COSS to Simplify Design, (See App. Note AN1001) l Fully Characterized Avalanche Voltage and Current l S S S G 1 8 7 A A D D D D 2 3 6 4 5 Top View SO-8 Absolute Maximum Ratings Parameter ID @ TA = 25C ID @ TA = 70C IDM PD @TA = 25C VGS dv/dt TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Max. 3.6 2.9 29 2.5 0.02 30 7.9 -55 to + 150 300 (1.6mm from case ) Units A W W/C V V/ns C Thermal Resistance Symbol RJL RJA Parameter Junction-to-Drain Lead Junction-to-Ambient Typ. --- --- Max. 20 50 Units C/W Notes through are on page 8 www.irf.com 1 8/10/04 IRF7451PBF Static @ TJ = 25C (unless otherwise specified) Parameter Drain-to-Source Breakdown Voltage V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient RDS(on) Static Drain-to-Source On-Resistance VGS(th) Gate Threshold Voltage V(BR)DSS IDSS IGSS Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Min. 150 --- --- 3.0 --- --- --- --- Typ. --- 0.19 --- --- --- --- --- --- Max. Units Conditions --- V VGS = 0V, I D = 250A --- V/C Reference to 25C, ID = 1mA 0.09 VGS = 10V, ID = 2.2A 5.5 V VDS = VGS, ID = 250A 25 VDS = 150V, VGS = 0V A 250 VDS = 120V, VGS = 0V, TJ = 150C 100 VGS = 30V nA -100 VGS = -30V Dynamic @ TJ = 25C (unless otherwise specified) gfs Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Coss Coss Coss eff. Parameter Forward Transconductance Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance Min. 3.5 --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. --- 28 6.8 13 10 4.2 17 15 990 220 42 1260 100 180 Max. Units Conditions --- S VDS = 25V, ID = 2.2A 41 ID = 2.2A 10 nC VDS = 120V 20 VGS = 10V --- VDD = 75V --- ID = 2.2A ns --- RG = 6.5 --- VGS = 10V --- VGS = 0V --- VDS = 25V --- pF = 1.0MHz --- VGS = 0V, VDS = 1.0V, = 1.0MHz --- VGS = 0V, VDS = 120V, = 1.0MHz --- VGS = 0V, VDS = 0V to 120V Avalanche Characteristics Parameter EAS IAR Single Pulse Avalanche Energy Avalanche Current Typ. --- --- Max. 210 3.6 Units mJ A Diode Characteristics IS ISM VSD trr Qrr Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Min. Typ. Max. Units --- --- --- --- --- --- --- --- 76 270 2.3 A 29 1.3 110 400 V ns nC Conditions MOSFET symbol showing the G integral reverse p-n junction diode. TJ = 25C, IS = 2.2A, VGS = 0V TJ = 25C, I F = 2.2A di/dt = 100A/s D S 2 www.irf.com IRF7451PBF 100 100 VGS TOP 15.0V 12.0V 10.0V 8.0V 7.0V 6.0V 5.5V BOTTOM 5.0V VGS 15.0V 12.0V 10.0V 8.0V 7.0V 6.0V 5.5V BOTTOM 5.0V TOP ID, Drain-to-Source Current (A) 10 ID, Drain-to-Source Current (A) 10 1 0.1 1 5.0V 5.0V 0.01 20s PULSE WIDTH Tj = 25C 0.001 0.1 1 10 100 20s PULSE WIDTH Tj = 150C 0.1 0.1 1 10 100 VDS, Drain-to-Source Voltage (V) VDS, Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics RDS(on) , Drain-to-Source On Resistance (Normalized) 100 2.5 ID = 3.6A I D , Drain-to-Source Current (A) 2.0 10 TJ = 150 C 1.5 1 TJ = 25 C 1.0 0.1 0.5 0.01 4.0 V DS = 25V 20s PULSE WIDTH 5.0 6.0 7.0 8.0 0.0 -60 -40 -20 VGS = 10V 0 20 40 60 80 100 120 140 160 VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature ( C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRF7451PBF 100000 16 C, Capacitance(pF) 10000 Coss = Cds + Cgd VGS , Gate-to-Source Voltage (V) VGS = 0V, f = 1 MHZ Ciss = Cgs + Cgd, Cds SHORTED Crss = Cgd ID = 2.2A V DS= 120V V DS= 75V V DS= 30V 12 1000 Ciss Coss 8 100 Crss 10 1 10 100 1000 4 0 0 10 20 30 40 VDS, Drain-to-Source Voltage (V) QG , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 100 100 ISD , Reverse Drain Current (A) OPERATION IN THIS AREA LIMITED BY RDS(on) ID , Drain Current (A) 10us 10 100us 10 TJ = 150 C TJ = 25 C 1 1ms 1 10ms 0.1 0.2 V GS = 0 V 0.4 0.6 0.8 1.0 0.1 1 TC = 25 C TJ = 150 C Single Pulse 10 100 1000 VSD ,Source-to-Drain Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com IRF7451PBF 4.0 VDS VGS RD ID , Drain Current (A) 3.0 RG 10V Pulse Width 1 s Duty Factor 0.1 % D.U.T. + - VDD 2.0 1.0 Fig 10a. Switching Time Test Circuit VDS 90% 0.0 25 50 75 100 125 150 T A ,, Case Temperature ( C) T Ambient Temperature (C) 10% VGS td(on) tr t d(off) tf Fig 9. Maximum Drain Current Vs. Ambient Temperature Fig 10b. Switching Time Waveforms 100 Thermal Response(Z thJC ) D = 0.50 0.20 0.10 0.05 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) 0.1 0.0001 PDM t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.1 1 10 100 1000 10 1 0.001 0.01 t1 , Rectangular Pulse Duration (sec) Fig 10. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRF7451PBF RDS ( on ) , Drain-to-Source On Resistance ) ( ( RDS(on) Drain-to -Source On Resistance) , 0.085 0.120 0.083 0.080 VGS = 10V 0.105 ID = 2.2A 0.090 0.078 0.075 0.073 0.075 0.070 0 2 4 6 8 10 12 14 16 ID , Drain Current ( A ) 0.060 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 VGS, Gate -to -Source Voltage (V) Fig 12. On-Resistance Vs. Drain Current Current Regulator Same Type as D.U.T. Fig 13. On-Resistance Vs. Gate Voltage 50K 12V .2F .3F VGS QGS D.U.T. + V - DS QG QGD EAS , Single Pulse Avalanche Energy (mJ) 500 VG VGS 3mA Charge IG ID 400 ID 1.6A 2.9A BOTTOM 3.6A TOP Current Sampling Resistors Fig 13a&b. Basic Gate Charge Test Circuit and Waveform 300 200 15V V(BR)DSS tp VDS L 100 DRIVER RG 20V D.U.T IAS + V - DD 0 A 25 50 75 100 125 150 I AS tp 0.01 Starting TJ , Junction Temperature ( C) Fig 14a&b. Unclamped Inductive Test circuit and Waveforms Fig 14c. Maximum Avalanche Energy Vs. Drain Current 6 www.irf.com IRF7451PBF SO-8 Package Outline Dimensions are shown in millimeters (inches) D A 5 B DIM A b INCHES MIN .0532 .013 .0075 .189 .1497 MAX .0688 .0098 .020 .0098 .1968 .1574 MILLIMETERS MIN 1.35 0.10 0.33 0.19 4.80 3.80 MAX 1.75 0.25 0.51 0.25 5.00 4.00 A1 .0040 8 6 E 1 7 6 5 H 0.25 [.010] A c D E e e1 H K L y 2 3 4 .050 BASIC .025 BASIC .2284 .0099 .016 0 .2440 .0196 .050 8 1.27 BASIC 0.635 BASIC 5.80 0.25 0.40 0 6.20 0.50 1.27 8 6X e e1 A C 0.10 [.004] 8X b 0.25 [.010] A1 CAB y K x 45 8X L 7 8X c NOT ES : 1. DIMENS IONING & TOLERANCING PER ASME Y14.5M-1994. 2. CONT ROLLING DIMENS ION: MILLIMET ER 3. DIMENS IONS ARE SHOWN IN MILLIMETERS [INCHES]. 4. OUTLINE CONFORMS TO JEDEC OUTLINE MS -012AA. 5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS . MOLD PROTRUS IONS NOT TO EXCEED 0.15 [.006]. 6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS . MOLD PROTRUS IONS NOT TO EXCEED 0.25 [.010]. 7 DIMENS ION IS T HE LENGT H OF LEAD FOR SOLDERING TO A S UBST RAT E. 3X 1.27 [.050] F OOTPRINT 8X 0.72 [.028] 6.46 [.255] 8X 1.78 [.070] SO-8 Part Marking EXAMPLE: T HIS IS AN IRF7101 (MOSFET ) DAT E CODE (YWW) P = DES IGNAT ES LEAD-FREE PRODUCT (OPT IONAL) Y = LAS T DIGIT OF T HE YEAR WW = WEEK A = AS S EMBLY S IT E CODE LOT CODE PART NUMBER INT ERNAT IONAL RECT IFIER LOGO XXXX F7101 www.irf.com 7 IRF7451PBF SO-8 Tape and Reel Dimensions are shown in millimeters (inches) TERMINAL NUMBER 1 12.3 ( .484 ) 11.7 ( .461 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES: 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 330.00 (12.992) MAX. 14.40 ( .566 ) 12.40 ( .488 ) NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. Notes: Repetitive rating; pulse width limited by max. junction temperature. Pulse width 400s; duty cycle 2%. Coss eff. is a fixed capacitance that gives the same charging time When mounted on 1 inch square copper board. as Coss while VDS is rising from 0 to 80% VDSS. Starting TJ = 25C, L = 33mH, RG = 25, IAS = 3.6A. ISD 2.2A, di/dt 180A/s, VDD V(BR)DSS, TJ 150C Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.08/04 8 www.irf.com |
Price & Availability of IRF7451PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |